Page-4 All Products - Flanged Hexagon Head Bolts,Flange Bolt,Hexagon Flange Bolts,Frame Bolts ,Hex Nuts,Flat Washer

Standard Size Drywall Anti Loosening Screws

The most common modes of threaded fasteners failure under dynamic loads are fatigue and self-loosening.Self-loosening is often encountered when threaded fasteners are subjected to transverse or shear load,which can cause gradual loss or even complete loss of the clamping force in bolted connections. Ultimately, it is...

Contact Now

Standard Size Mechanical Anti Loosening Screws

There are various types of screw fasteners and/or parts with additional features designed to prevent loosening. Their actual ability is questioned and concretely examined. Seven types of those so-called anti-loosening nuts which are readily available in the market are compared with conventional nuts and evaluated...

Contact Now

Drywall Mechanical Anti Loosening Glue Screws

It is widely known that screw fasteners loosen sooner or later, even so-called anti-loosening screw fasteners available in the market do not prevent loosening, as reported in an earlier paper. The purpose of this paper is to present the development of a real anti-loosening screw fastener that has a strong resistance...

Contact Now

Stainless Steel Mechanical Anti Loosening Glue Screws

One of the main functions of stainless steel anti loose screw is to prevent loosening. Many people don’t know what is called anti-loose screws. Usually, the head of a screw has a tooth or a threaded glue to prevent loosening. The locking screws on the head have a non-slip effect. The glue lock screw is used in the...

Contact Now

Three Combined Compressor Combination Screw Drill

Set screws are used when one component has to be fixed within another one without any protrusions which could decrease the efficiency of the equipment. For example, fastening a gear and shaft assembly with a regular hex bolt might be inefficient as the hex head might cause inconveniences for the smooth operation of...

Contact Now

Point Glue-Locking Plum Blossom Hex Combination Screw Bolt

When choosing a set screw, it's important to consider material hardness, how often the assembly is adjusted or disassembled, desired drive type, point style or tip type, required holding power and any other factors that may affect the selection process. The application largely determines which point or tip is...

Contact Now

Mechanical Anchor Combined And Combination Screw

Set screws are usually headless but are sometimes headed fasteners with external machine screw threads and a point that is application specific. Despite being heralded early on as "an invention of the devil," they are the de facto method used to locate and fasten collars, drive wheels, gears, knobs, pulleys and other...

Contact Now

Combined Hex Compressor Combination Screw

A socket set screw is also called a grub screw. It has no head and is typically tightened or loosened with a square or hex key, although a slotted set screw can be adjusted with a screwdriver. Socket set screws prevent movement of a pulley or similar machine part relative to a shaft. A cup point set screw has a...

Contact Now

Combined Air Compressor Hex Three Combination Screw

These socket set screws are headless screws that are fully threaded with a recessed internal socket drive to add strength. Used for fastening in confined areas where the head must be below or flush with the surface, they can be fastened with an Allen key. The flat point design is intended for resetting or relocating...

Contact Now

Driver And Pliers Longnose Hex Combination Screw

Hex Socket Set Screws are manufactured in nominal diameters ranging from 1/8”- 3” (M3 – M80). We offer fasteners in both USCS/Imperial and metric sizes. Our advanced and comprehensive range of capabilities include engineering, R&D, prototyping, custom manufacturing, precision processing and testing. All HASM...

Contact Now

Car Wheel Flange Locking Nuts For Rims

Lug nuts hold your wheel to your car, so you’ll need to take them off to change a tire or work on your suspension. That’s easy unless one of your lug nuts is a special “locking type.” The Nord-Lock wheel nut range has been extended to 6 sizes, M-16-M24. This large range offers increased safety for both on-road and...

Contact Now

Standard Size Clamp Flange Lock Nuts For Rims

Locknuts lock fasteners in place to keep them from backing out or loosening due to vibration or torque. A locknut is commonly used in place of a standard nut on vibrating machinery and when joining soft materials. Types of locknuts include those with serrated flanges or tooth washers that dig into surfaces and those...

Contact Now

Standard Type Hex Weld Cap Lock Nuts

Lock nuts are available in numerous styles, grades and finishes. The term “lock nut” is not meant to imply that there is an indefinite permanency of fixity once used. Most locknuts can be removed and some can even be reused if removed correctly. Lock nuts are most commonly available in ASTM A563 Grades A and DH and...

Contact Now

General Industry Flange Car Wheel Locking Nut

Lock nuts are hex nuts with a nylon insert. This design minimizes vibration, corrosion, and helps to prevent loosening. The flat side of the lock nut should sit flush with the material once tightened. Used to connect both metal and wood components Made from zinc plated steel for durability Use a 7/16 in. socket or...

Contact Now

Standard Tyre Flange Lock Nuts For Rims

Lock nuts that use friction to resist loosening usually require a greater torque to both tighten and loosen, especially during the initial free rotation before they start to clamp down on the part. This means that they cannot be spun rapidly along a long length of thread, greatly increasing manual assembly time....

Contact Now

Standard Size Metal Wheel Fingerboard Conduit Lock Nuts

A lock nut is a nut that will resist loosening under vibration and torque. There are many types of lock nut but they can be broadly divided into those which use friction to prevent loosening and those that have some form of positive locking device. wholesale factory price standard size metal wheel fingerboard conduit...

Contact Now

Standard Size Metal Fingerboard Cam Lock Nut

Lock nuts that use a positive locking device can be freely rotated to both tighten and loosen, they only lock when a positive action is performed to lock them in their current position, such as inserting a pin. This can enable both more rapid assembly and more secure fastening. Examples include: A castellated nut, or...

Contact Now

Wheel Self Metal Locking Nuts For Rims

Lock nuts feature a unique design that prevents them from loosening when exposed to vibrations. Traditional nuts simply consist of a basic threaded hole, so constant exposure to vibrations can knock them loose from the bolt on which they are placed. Lock nuts protect against loosening, however, by featuring a design...

Contact Now

Standard Size Metal Fingerboard Locking Self Wheel Nuts

Also known as a stiff nut, a lock nut is a special type of nut that doesn’t loosen when exposed to vibrations. In the past, companies would simply use two nuts in applications where vibrations are problematic. After inserting one nut onto the end of the bolt, they would place a second nut on the bolt. While the use of...

Contact Now

Standard Size Bearing Buy Metal Wheel Lock Nuts

A nut if a fastener featuring a threaded, circular interior that’s used in conjunction with a bolt to secure multiple objects together. After inserting a bolt through the objects, a nut can be twisted onto the end of the bolt, thereby securing the objects. Unfortunately, it’s not uncommon for traditional nuts to...

Contact Now

Gb5787 Flanged Serrated Hex Head Flange Cars Bolts

Hex head flange bolt have a circular flange under the head that acts like a washer to distribute the load. Flange bolts that are non-serrated are sometimes called frame bolts. We are produce Various bolts，for example Hex bolts，Hexagon half bolt ，Carriage bolt ，Hex head flange bolt，T head bolts，Articulated...

Contact Now

Stainless Steel Hex Flange Bolts

Hex Flange Bolts are regular hex head bolts with built-in washer and externally threaded body. Flange bolts comes with plain or serrated flange configuration. Hexagon flange bolts, flange bolts, frame bolts are other alias are defined in both metric of hex flange bolts. Hex flange bolt dim and imperials sizes with...

Contact Now

Gb5787 Hexagon Hex Head Flange Bolts

Model No.: gb5787

High quality Stainless Steel provides strength and offers good corrosion resistance in many environments. Flange bolts have a flange on the bottom of the head that distributes the load like a washer. We are produce Various bolts，for example T head bolts,Articulated bolt,Expansion bolt,Anti-loosening bolts and...

Contact Now

Stainless Steel Thread Slotted Castle Square Nuts

A square nut, or square head nut, is a four-sided nut that is designed for use with a square head bolt and flat washer. Square nuts offer greater surface contact with the part being fastened compared to a standard hex nut, and therefore provide greater resistance to loosening. They also work well in tight spaces when...

Contact Now